Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Really debated on posting this as it was really stupid on my part. Nearly 2 weeks ago I was in a man lift panning around the top of my pole barn, not realizing how high I as backed my head into a high power transmission line (no insulation, 125k v). The experience was horrific, burned the edges of my tongue and shot a small hole out my right foot, but I walked away from it. My question: Have you or anyone you know ever contacted this high of voltage and survived to talk about it? This is not a contest of stupidity, but rather looking for some insite as what to what later effects I may see. I have a clean bill of heath from the doc for now.
I have been shocked several times touching wires in an electrical socket or light switch. It scares you more than it hurts. But I think overhead power lines are a whole different story. A guy from my hometown got electrocuted as a kid on power lines. It burnt off one ear and scarred his face, but he lived. He's now about 70.
Thank you, I'll watch out for that, especially during these trying times.People that sustain electric shock have been known to develop depression and other mental illness down the road. Please make your loved ones aware and have them watch you for any personality changes.
No, but it was a bit darker the next couple of daysI would interested in what happened the next time you went to use the bathroom, did smoke just come out?
Seriously though, glad you’re alive.
I always used to think this too, but...Also many people don’t know that there is a difference between electrical shock and electrocution.
If you live, you sustained an electrical shock. Electrocution is death by electrical shock.
125kV? That seems really high to be that close to a pole barn. I'm amazed you weren't getting shocked prior to coming in contact with the wire.
We've got a section bridge that were building that's 70' below a ~130kV powerline and we have to ground everything (rebar, safety lines, metal forms, metal deck pans, etc) as there is enough stray current in the air to keep nuisance shocking our crews. Surveyors had to shoot everything manually because the excess current and electromagnetic fields keep the robot from locking on.
That said, you got really lucky. Electricity is something that I don't like to mess with
The town I live in is unincorporated. I purchased the alleyway next to my land from the county years ago. The utility poles were already there when I started building. Alliant energy is in the process of burying the lines.125kV? That seems really high to be that close to a pole barn. I'm amazed you weren't getting shocked prior to coming in contact with the wire.
We've got a section bridge that were building that's 70' below a ~130kV powerline and we have to ground everything (rebar, safety lines, metal forms, metal deck pans, etc) as there is enough stray current in the air to keep nuisance shocking our crews. Surveyors had to shoot everything manually because the excess current and electromagnetic fields keep the robot from locking on.
That said, you got really lucky. Electricity is something that I don't like to mess with.
If it's in town distribution, I would guess it would be 12.5 kV. 125 kV would likely be large multi-pole transmission lines with significant offsets required.The town I live in is unincorporated. I purchased the alleyway next to my land from the county years ago. The utility poles were already there when I started building. Alliant energy is in the process of burying the lines.
As far as the voltage... Just going on what the linemen said. You can assign any value you want, really does not matter, it's death voltage. There is a red line on the backside of my head, but I doubt I came in direct contact. When you let go of the buttons on the lift it will coast a few inches. The sound I heard inside my head was awful.