Basement Sump Pump install recommendation

[BryceC]

Long story short, my dog chewed all of the wiring on the sump pump including the battery but it was probably time to replace that anyway. Basically all needs replaced.

Anybody get this done? I could probably do it but the downside for me doing it wrong is pretty catastrophic so I'm willing to just pony up the cash. I got a bid on it but I thought it was outlandishly high, I didn't know if my expectations were out of whack or what but if anybody has a recommendation on a guy I'll probably go with that.

 

[jbclone10]

its a pretty simple replacement. I helped my BIL do two of them last summer (with battery backups). Biggest issue we faced was the lack of space. One was tucked into a troublesome corner covered by a cabinet. He also had water actively filling up too lol.

 

[DSMCy]

Should be an easy DIY project. You may want to grab a small section of PVC in case your new sump pump isn't the exact same size, or the outlet isn't in the same place, as your current pump.
Otherwise it's pretty much just connecting PVC and plugging it in.

You can dump a 5 gallon bucket of water down there once you're done to test it. Should do that at least once a year anyway

Pumps themselves can be pricey, plus I'd guess that your quotes included a battery backup, so I wouldn't be surprised that bids would be pretty high.

 

[Rick]

We got ours done for around $200.00 if you're looking for a cost comparison.

 

[Billups06]

Had a sump pump malfunction (would not cycle off) and eventually stop working a couple years ago. I used Lazer Home Services, only ones with availability to fix/replace that morning. Not cheap ~$1k with install. Though, I did upgrade to a model that has an online interface, send alerts etc.

 

[DSMCy]

We got ours done for around $200.00 if you're looking for a cost comparison.

If that included the pump, that's an incredible deal

 

[Cycsk]

I get the sump pump replaced every three years and then keep the old one for other purposes.

 

[CycloneDaddy]

Just replaced my 13 year old sump pump.

1/3 hp is around $110, 1/2 hp is $130 and $20 in pvc and purple glue. Make sure the float doesnt make contact with the wall. I would say to allow 2 hours from start to finish but can be done faster.

I would also replace the backflow valve while doing it so there is another $20.

 

[Letterkenny]

I'd do it yourself. You can buy them at Menards or Home Depot. Probably just need a 1/2" HP for around $100 (look at the old one and match it). I think those places sell 1/3, 1/2, 3/4 or 1 HP. Takes 10-15 minutes. All you have to do is hook it up to the drain pipe, plug it in, & turn it on. Pour a couple buckets of water into the sump to make sure it's working and pumps it out properly. Look up some youtube videos and they'll walk you through it really well.

 

[BryceC]

We got ours done for around $200.00 if you're looking for a cost comparison.

I got quoted 2,400 and about did a spit take.

 

[CycloneDaddy]

I got quoted 2,400 and about did a spit take.

Was that for a new sump pump and a battery backup?

 

[JEFF420]

guys, its an easy install. even if you have to punch into your floor. run a GFCI outlet, dry fit and punch outside . glue and go... don't forget the check valve

 

[JEFF420]

no where near $2400 unless you have that kinda money to blow

 

[Pat]

I got quoted 2,400 and about did a spit take.

Do they think they’re digging the pit, too? That’s insane.

 

[DSMCy]

I got quoted 2,400 and about did a spit take.

Are you near central Iowa/DM? You could list it on HUDU and see what kind of bids you get

 

[AgronAlum]

guys, its an easy install. even if you have to punch into your floor. run a GFCI outlet, dry fit and punch outside . glue and go... don't forget the check valve

Some pumps even come with the check valve built in so that's not even required.

$2400 seems insane for a sump pump replacement.

 

[Rick]

Was that for a new sump pump and a battery backup?

I did not get the battery backup but I think we already had one. It's not my expertise area but the install took about an hour and the pump was under $200.

 

[BCClone]

Just replaced my 13 year old sump pump.

1/3 hp is around $110, 1/2 hp is $130 and $20 in pvc and purple glue. Make sure the float doesnt make contact with the wall. I would say to allow 2 hours from start to finish but can be done faster.

I would also replace the backflow valve while doing it so there is another $20.

if you have a backflow, just adjust the height there if you need to cut a smidge.

I usually just unscrew what is in the old one and screw it into the new one, slide it into the backflow and it’s rolling in minutes. I always have a spare on hand just incase.

Don’t have your pump on the bottom either. If you do landscaping, that’s a good way to plug a pump. Good to clean the bottom out in the fall also.

 

[CloneFanInKC]

Long story short, my dog chewed all of the wiring on the sump pump including the battery but it was probably time to replace that anyway. Basically all needs replaced.

Anybody get this done? I could probably do it but the downside for me doing it wrong is pretty catastrophic so I'm willing to just pony up the cash. I got a bid on it but I thought it was outlandishly high, I didn't know if my expectations were out of whack or what but if anybody has a recommendation on a guy I'll probably go with that.

I strongly suggest replacing with a unit that connects to an app and displays last cycle output, backup battery and additional data. I find the model I want but haven’t needed to replace yet.