So my year and a half old washer is now leaking water. It is not coming from any of the hoses out of the back. I am hoping it is something easy that I can fix on my own, but need some help troubleshooting the possibilities. Any advice would be awesome.
Call Dey Appliance in Urbandale with the model and problem. They will probably know resolution to problem. I had similar probelm on 8yr old maytag, and if I remember correctly, it was a seal on water pump. They sell to do-it-yourselfers, and might have a referall for you too, if you don't do it yourself. Parts will be cheap, labor won't. Good luck.
You can buy a plastic liner at Lowes to capture floor water if you cannot afford to have a small leak.
Big leaks - call the repairment if it is not a hose. In worst case, the tuib may need replaced.
Could also be one of the pumps -- the pump that removes the water on mine has a plastic housing and cracked.. I had to do some sheetrock work when mine decided to let loose and flooded my floor and ruined the ceiling below. Mine was HE whirlpool model.
All content owned by CycloneFanatic.com - All rights reserved 2005-09. By viewing this website you agree to the Terms of Service, Site Rules and Legal Disclaimer. The words, views, images and opinions expressed or provided by users do not reflect the opinions or views of CycloneFanatic.com or Iowa State University. The names, words, symbols, and graphics representing Iowa State University are trademarks and copyrights of the University protected by the trademark and copyright laws of the United States of America and other countries and are used on this web site under license from the University. Original site design, premise & construction by Jeremy Lind.